I Open Scan - Icom IC-400PRO Instruction Manual

4
SCAN OPERATION

I Open scan

Open scan searches for being transmitted signals automati-
cally and makes it easier to locate new stations for contact or
listening purposes.
IMPORTANT!:
• A microphone should be on hook to start scanning.
• During open scan, transmission is inhibited except on a
busy channel.
q Push [SCN] (Scan Start/Stop) for 1 sec. to enter the scan
type selection mode.
Push [SCN] for 1 sec.
w Push [
]/[
Push [
11
Previously selected scan type
is displayed.
] to select the open scan.
] or [ ]
Open scan
e Push [SCN] (Scan Start/Stop) for 1 sec. to return to
Normal mode.
- "OS" appears besides the channel number indication.
Open scan setting
r Push [SCN] (Scan Start/Stop) to start the open scan.
t When receiving a signal, scan pauses and resumes
according to the selected scan resume condition. (p. 10)
y Push [SCN] (Scan Start/Stop) to cancel the scan.
Start channel