Table of Contents
Advertisement
D Scan resume mode
Push
to enter the menu mode.
q
Push [
] or [] to select "Scan Resume."
w
("Settings" > "Scan Resume")
Push [
] or [] to select the desired scan resume mode,
e
and then push [] to set.
• 5sec:
Scan pauses for 5 seconds, and then resumes.
• 10sec:
Scan pauses for 10 seconds, and then resumes.
• 15sec:
Scan pauses for 15 seconds, and then resumes.
• 5sec No Signal: Scan pauses until the signal disappears, and
then resumes 5 seconds after the signal has
disappeared.
5sec No Signal is recommended for normal use, and is set as
the default.
r Push
to exit the menu mode.
■ Open scan
An Open scan automatically searches for transmitted
signals and enables you to locate new stations for
communication or listening.
IMPORTANT!
An Open scan can transmit on a start channel or busy channel.
Select "Open Scan" in the "Scan Mode" menu. (p. 22)
q
• "
" appears on the operating screen.
Open scan is selected.
Push
to start the Open scan.
w
e When receiving a signal, the scan pauses and resumes,
according to the selected Scan resume mode (see to the
left.)
r Push
to cancel the scan.
SCAN
Appears
Blinks
Scan start channel
6
6
23
Hide quick links:
Advertisement
Table of Contents
