Open Scan - Icom IC-440N Instruction Manual

6
SCAN
D
Scan resume mode
q
F
Hold down
SET
mode.
w F MONI
Push * or
T SQL
SET
e
Push or
• 5 : Scan pauses for 5 seconds then resumes.
• 10 : Scan pauses for 10 seconds then resumes.
• 15 : Scan pauses for 15 seconds then resumes.
• P5 : Scan pauses until the signal disappears, then resumes
for 5 seconds after the signal disappears.
( P5 is recommended for typical use, and is the default setting).
r Hold down
for 2 seconds to turn OFF the power, or hold
down F (Set Mode) for 2 seconds to exit Set mode.
SET
*Regardless of the assigned key function.
30
(Set Mode) for 2 seconds to enter Set
* several times until "SCN-T" appears.
to select the Scan resume timer.
■

Open scan

Open scan automatically searches for transmitted signals
and facilitates to locate new stations for contacting or listen-
ing purposes.
IMPORTANT!:
Open scan can transmit on a start channel or busy channel.
q
Push O G P (Scan Mode) several times to select the Open
RS
scan. (p. 29)
• " " appears.
Open scan is selected.
w
SCAN
Push (Scan) to start the Open scan.
TAG
e When receiving a signal, scan pauses and resumes, ac-
cording to the selected Scan resume mode (see to the
left.)
r Push
SCAN
to cancel the scan.
(Scan)
TAG
Appears
Blinks
Scan start channel