Associate Lsps With Network Regions - Avaya G700 Installation And Upgrades

IP Network Region Screen
change ip-network-region 1
Region: 1
Name:
Audio Parameters
Codec Set: 1
Location:
UDP Port Range
Min: 2048
Max: 65535
DiffServ/TOS Parameters
Call Control PHB Value: 34
VoIP Media PHB Value: 0
BBE PHB Value: 43
802.1p/Q Enabled? N
If necessary, complete the fields as described in ''Administration for Network Connectivity for
2.
Avaya™ Communication Manager, 555-233-504.''
Note: It is strongly recommended to use the defaults in the screen. However, for the
RTCP Enabled and RSVP Enabled fields, the entry should be
3. Press F 3 (

Associate LSPs with Network Regions

If the primary controller has LSPs, you can associate each LSP with one or more network regions. In
the event of a network failure, IP telephones assigned to a network region will register with an LSP
associated with that region.
This procedure associates up to six LSPs with a network region.
Associate LSPs with a network region
On the IP Network Region screen, go to page 3.
1.
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
4 Installing a New G700 without an S8300: Administer Communication Manager
E NT ER ) to submit the screen.
IP Network Region
Direct IP-IP Audio Connections? n
IP Audio Hairpinning? y
RTCP Monitor Server Parameters
Use Default Server Parameters? y
Resource Reservation Parameters
Page 1 of
RTCP Enabled? n
RSVP Enabled? n
(no).
n
191
2