Avaya G700 Installation And Upgrades page 120

3 Installing a New G700 with an S8300: Configure the S8300
Warning Screen
This is the final step in configuring the system. When you click Continue, all the configuration
information will be written to disk and implemented. This step normally completes in about 5
minutes.
This is your last chance to cancel or correct the configuration.
25. To check, or possibly change, something you entered on a previous screen, use your browser's
button to page back through the Configure Server screens.
Back
Check or change the items in question.
26.
Click the
27.
don't do this, information in the wizard may not be processed correctly.
Note: For any configuration, it is always safe to Cancel the configuration, and run the
Configure Server wizard again later from the beginning. You might use this option
if you are checking or modifying settings on a server that has already been
configured, and there is not a large amount of new information to enter.
On the Update System screen, if you are satisfied that everything is set correctly, click
28.
You can watch the progress of the configuration at the
configuration status displays stops updating at some point and the screen appears to freeze, you
may have lost contact with the server. In this case, the configuration process will continue and you
can log back on and pick up where left off.
120
button to move forward again, whether you change anything or not. If you
Continue
Installation and Upgrades for G700 with S8300 or S8700
Updating System Files screen. If the
555-234-100 — Issue 3 — May 2003
.
Continue