Assign Lsps To The Network Regions - Avaya G700 Installation And Upgrades

Assign LSPs to the Network Regions

If the primary controller has LSPs, you can assign the LSPs to network regions. In the event of a
network failure, IP telephones assigned to a network region will register with the LSPs assigned to
that region.
This procedure assigns up to six LSPs to a network region.
Assign LSPs to a network region
1. On the IP Network Region screen, go to page 3.
IP Network Region Screen, page 3
change ip-network-region 1
LSP NAMES IN PRIORITY ORDER
1 node-10-LSP______
2 ________________
3 ________________
4 ________________
5 ________________
6 ________________
2. Enter the names of up to six LSPs to be assigned to region 1. The LSP names must be the same as
administered on the Node Names form.
Submit the form.
3.
Repeat for each network region to which you want to assign LSPs.
4.
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
4 Installing a New G700 without an S8300: Administer Communication Manager
IP Network Region
Page 3 of 3
199