Install A New G700 Without An S8300 - Avaya G700 Installation And Upgrades

Checklist 2:

Install a New G700 without an S8300

Use the following checklist to install a G700 Media Gateway with the following characteristics:
• The G700 does not have an S8300 and is controlled by an external S8300 or S8700 Me00dia Server.
You will use Chapters 2 and 4 with this checklist.
For help with connecting to and logging in to the G700, see
Checklist 2. Install a New G700 without an S8300
Task
"Installation Overview" on page 162
"Before Going to the Customer Site" on
page 164
"Installing Hardware for the G700
Media Gateway and S8300 Media
Server" on page 61
"Configure the G700" on page 168
"Prepare to Install Firmware the G700"
on page 181
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003
1 Roadmap and Reference: Installation Roadmap and Task Lists
Connection Methods
Subtasks (If any)
- Get planning forms
- Get the G700 serial number
- Set up TFTP server, if necessary
- Download firmware files
- On site checklist
- Unpack and check the order
- Install the G700
- Cable multiple units
- Attach ground conductors
- Assign IP addresses to the G700 processors
- Set up IP routing for the stack
- Set up default IP route for the G700
- Check IP connections
- Set up controller list for the G700
- Configure X330 Expansion Module, if necessary
- Verify contents of the tftp directory
- Determine which firmware to install
in this chapter.
1 of 2
33