Avaya G700 Installation And Upgrades page 240

6 Upgrading an Existing G700 without an S8300: Upgrade Overview
LAN connections
If you can connect to the customer's LAN, you can:
1 . Use your Internet Explorer browser to access the Web interface on the primary server and use the
LSP/G700 Upgrade Tool.
2 . Telnet to the P330 stack processor and perform the installation commands.
For LAN connections the TFTP server can be your laptop or a customer computer on the LAN.
Direct connections
1 . If you are at the location of the primary server, you can connect directly to the Services port on
the server and:
- Open the Web interface and use the LSP/G700 Upgrade Tool.
- Or, telnet to the server and telnet to the P330 stack processor
2 . If you are at the location of the G700, you can connect directly to the G700 Console port and
open a Hyperterm session to access the P330 stack processor.
For direct connections, the TFTP server must be on the Customer LAN, not on your laptop.
See "Connection and Login Methods" in Chapter 1 for details on how to connect and log into the G700.
240
Installation and Upgrades for G700 with S8300 or S8700
555-234-100 — Issue 3 — May 2003