Avaya G700 Installation And Upgrades page 182

4 Installing a New G700 without an S8300: Prepare to Install Firmware the G700
Directory List for P300 Processor
M# file
-- ----
1 module-config
1 stack-config
1 EW_Archive
1 Booter_Image
Check the version number (ver num) of the EW_Archive file to see if it matches the Release
2.
Letter. If not, you must upgrade the P330 stack processor.
3. Type show image version
The system displays the list of software.
Show Image Version List for P330 Processor
Mod Module-Type
------ -----------
3 Avaya G700 Media Gateway
3 Avaya G700 Media Gateway
Check the version number of the stack software image file in Band B to see if it matches the your
4.
planning document. If not, you must upgrade the P330 stack processor.
Determine if new firmware is required for the MGP, VoIP Module, and installed media modules.
Type session mgp
1.
At the MG-001-1(super)# prompt, type show mg list_config
2.
The system displays the list of software.
182
ver num file type
------- ----------
N/A Running Conf
N/A Running Conf
3.8.6 SW Web Image
3.2.5 SW BootImage
Installation and Upgrades for G700 with S8300 or S8700
file location file description
------------- ----------------
Ram Module Configuration
Ram Stack Configuration
NV-Ram WEB Download
NV-Ram Booter Image
555-234-100 — Issue 3 — May 2003
Bank Version
---- -------
A 0.0.0
B 3.9.0