Tools, Test Equipment, And Supplies - Printronix P9012 Maintenance Manual

Replacement Procedures
This chapter contains removal/installation procedures for components
replaceable at the field service maintenance level. For the page location of
removal/installation tasks, consult the table of contents on page 6–1.
Printed circuit board assemblies (PCBAs) and the shuttle assembly are field
replaceable and factory repairable. Do not attempt field repair of any PCBAs
or the shuttle assembly.
Some part numbers listed in this chapter contain a "–901" extension. This
extension designates a field replaceable item. The part number for the actual
production part contains a "–001" extension. When ordering a replacement
assembly, specify the "–901" extension.
In addition, the parts list on each drawing may specify "N/A" for some parts.
This indicates that the part number is not available, or is not applicable to the
procedure being described.

Tools, Test Equipment, and Supplies

For a list of tools, test equipment, and supplies required to perform field level
maintenance, refer to Table 1–3 on page 1–11.
Replacement Procedures 6–3