Cam Wick - Printronix P9012 Maintenance Manual

Cam Wick

(Figure 6–12)
Removal
1. Remove the flywheel assembly as described on page 6–36.
2. Remove one screw (1) and bracket (2).
3. Remove the cam wick (3) and discard.
Installation
1. Using a heavy cloth moistened with isopropyl alcohol, remove all metal
shavings from the flywheel assembly (4) and base support (5).
2. Position the wick as shown.
3. Install the screw and bracket.
4. Install the flywheel assembly as described on page 6–38.
6–40 Replacement Procedures