Chapter 4
Maintenance Tools
If the print quality is still poor after cleaning the printer, the chargers
may need to be replaced. Contact your authorized service
representative for further assistance.
NOTE: For replacement intervals, see the maintenance schedules
Maintenance Tools
In order to perform maintenance on the printer, the following tools
are required:
Item
Brush cleaner
Drum auxiliary rod
Drum freshener pad
Fuser cover glass scraper
Special dry tissue paper
Standard toner vacuum cleaner
Toraysee cloth
Wire cleaner
9 inch Phillips #1 screwdriver
Recommended toner vacuum cleaner models are:
•
3M
•
3M model 497-AB 220V with Type 1 filter
•
Hitachi
78
that begin on page 81. For replacement procedures, see
Chapter 3, "Consumables Replacement."
®
model 497-AJM standard VAC with Type 1 filter
®
CV-TN10 with TN-15 filter
Part Number
703531-169
703531-170
703531-171
703531-187
703531-188
See recommended
models below.
703531-183
703531-168
N/A