Prepare The Printer For Operation - Printronix P9012 Maintenance Manual

Prepare the Printer for Operation

1. Load the paper. (Refer to "Loading Paper" in the P9012 User's Manual.)
2. Turn printer power on and place the printer on line.
Anytime you remove paper from the stack of printed paper, it is
important to return the paper stacker to the operating position. You
must manually stack the first three or four sheets.
Press the paper stacker toggle switch "UP" to raise the paper tray until
it blocks the beam or reaches the upper limit switch and stops. Press the
PAPER ADV switch on the control panel two or three times to be sure
the paper is stacking correctly.
The stacker will not allow the tray to raise when the printer is in a paper
motion (printing) mode.
A–20
IMPORTANT
Power Paper Stacker Maintenance