Control Panel - Printronix P9012 Maintenance Manual

Control Panel

(Figure 2–10 and Figure 2–11)
The control panel consists of ten indicators, 16 momentary contact switches,
and an LCD alphanumeric display.
The control panel processes and sends switch closure information to the
DCU. It receives information on setting up the alphanumeric display as well
as status information. For a detailed discussion of panel operation, refer to
the P9012 User's Manual.
Status Lamps
Message Display
These switches are provided only
if the printer is equipped with an
IBM 3287 interface.
These switches are visible only
with the printer cover open.
2–12
ON LINE
CLEAR
6/8 LPI
PAPER ADV
HOLD ENABLE
REPRINT PA1
CANCEL PA2
ALT MODE
MENU UP NEXT RUN/STOP
MENU DOWN PREV
Figure 2–10. Control Panel
ON LINE
CHECK
8 LPI
VFU LOADED
PRINT MODE
ENTER F/L
Principles of Operation