K.3.1 How To Confirm Firmware Version For Fc Card Made By Qlogic; Figure K.19 Fujitsu Logo Window; Figure K.20 Confirmation Of Uefi Driver Version And Firmware Version - Fujitsu PRIMEQUEST 2000 Series Administration Manual

Appendix K How to Confirm Firmware of SAS RAID Controller Card
K.3

K.3.1 How to confirm firmware version for FC card made by Qlogic

Confirming UEFI driver version and firmware version
1. Select [Force boot into EFI Boot Manager] by [Boot Selection] in [Power Control] window of MMB Web-UI.
Partition is powered on and logo of FUJITSU appears.
Note
For a FC card made by Qlogic, you can confirm the firmware version only when a partition starts up.
2. UEFI driver version and firmware version is shown.

FIGURE K.20 Confirmation of UEFI driver version and firmware version

Note
Window goes next automatically.
3. Boot Manager front page appears.
How to confirm firmware version and UEFI driver version of FC card

FIGURE K.19 FUJITSU logo window

294
C122-E175-02EN