Figure K.6 Dh Command Of Uefi Shell; Figure K.7 Selection Of Efi Webbios / Efi Cli - Fujitsu PRIMEQUEST 2000 Series Administration Manual

Appendix K How to Confirm Firmware of SAS RAID Controller Card
K.1
8. Execute the drvcfg -s XX YY command.
Specify the following for [XX] and [YY].
- XX: UEFI driver number confirmed in step 2
- YY: Controller number confirmed in step 3
Shell> drvcfg -s 126 125
9. The window where you select either EFI WebBIOS menu or EFI CLI menu appears. Select [1 for EFI
WebBIOS].
10. WebBIOS starts up. The list of mounted RAID controller is shown in [Adapter Selection] window.
[Type] shows the name of RAID controller.
How to confirm firmware version of SAS RAID controller card

FIGURE K.6 dh command of UEFI Shell

FIGURE K.7 selection of EFI WebBIOS / EFI CLI

288
C122-E175-02EN