K.3.2 How To Confirm Firmware Version For Fc Card Made By Emulex; Figure K.25 Driver List; Figure K.26 Confirmation Of Uefi Driver Version - Fujitsu PRIMEQUEST 2000 Series Administration Manual

Appendix K How to Confirm Firmware of SAS RAID Controller Card
K.3
5. Check UEFI driver version
Check version of QLogic Fibre Channel Driver.
Example:
'00000224' in version of UEFI driver means '2.24'.
Note
For a FC card made by Qlogic, you can confirm the firmware version only when a partition starts up.

K.3.2 How to confirm firmware version for FC card made by Emulex

Displaying Device Manager
1. Select [Force boot into EFI Boot Manager] by [Boot Selection] in [Power Control] window of MMB Web-UI.
Partition is powered on and logo of FUJITSU appears.
How to confirm firmware version and UEFI driver version of FC card

FIGURE K.25 Driver list

FIGURE K.26 Confirmation of UEFI driver version

297
C122-E175-02EN