Checking Into Errors In Detail; Problems Related To The Main Unit Or A Pci_Box; Figure 11.10 [Partition Event Log] Window - Fujitsu PRIMEQUEST 2000 Series Administration Manual

Primequest 2000 series
Hide thumbs Also See for PRIMEQUEST 2000 Series:
Table of Contents

Advertisement

CHAPTER 11 Error Notification and Maintenance (Contents, Methods, and Procedures)
11.2 Troubleshooting
Finding out the partition error status
Examine the partition error status in PRIMEQUEST 2400E and 2800E.
Select [System] - [Partition Event Log] in the [MMB] menu window.
On the [Partition Event Log] window, you can find out about problems in the partition from the displayed log.
For details on how to read agent log messages, see PRIMEQUEST 2000 Series Message Reference (C122-
E178EN).
The Message Reference lists the meanings of messages and corrective actions in order of event IDs. The
[Partition Event Log] or the [Agent Log] window lists event IDs and message details to inform you of problems.

11.2.6 Checking into errors in detail

Check the details of messages to take appropriate action.
According to the message ID in the displayed log, check the message details in the list of messages in the
PRIMEQUEST 2000 Series Message Reference (C122-E178EN). Then, take appropriate action.
-
System event messages detected by the MMB: Chapter 2 MMB Messages in the PRIMEQUEST 2000
Series Message Reference (C122-E178EN)
-
Messages detected by the partition: Chapter 3 sadump Messages in the PRIMEQUEST 2000 Series
Message Reference (C122-E178EN)
Remarks
-
Be sure to write down the message ID and message details because they will be needed when you
contact a field engineer or your sales representative.
-
If the list of messages in the PRIMEQUEST 2000 Series Message Reference (C122-E178EN) does not
include the displayed message, contact a field engineer or your sales representative.

11.2.7 Problems related to the main unit or a PCI_Box

This section describes problems related to the main unit or a PCI_Box. It also describes how to correct the
problems.
An LED on the main unit does not go on, or the orange LED is on.

FIGURE 11.10 [Partition Event Log] window

222
C122-E175-02EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primequest 2400ePrimequest 2800ePrimequest 2800b

Table of Contents