CHAPTER 5 PCI Card Hot Maintenance in SUSE Linux Enterprise Server 11
5.3 Removing PCI Express cards
# /sbin/ifup ethX
[For the bonding configuration]
For a SLAVE interface added to an existing bonding configuration, execute the following command to
incorporate it into the bonding configuration.
Example: bondY is the bonding interface name, and ethX is the name of the interface to be incorporated.
# /sbin/ifenslave bondY ethX
For a newly added bonding interface with a SLAVE interface, execute the following command to activate
the interfaces. You need not execute the ifenslave command individually for the SLAVE interface.
# /sbin/ifup bondY
13. Mount all cables connected to the particular PCIC.
This step is performed by the field engineer in charge of your system.
Note
In GLS configuration with NIC switching way, you do not need to perform this step.
5.3
Removing PCI Express cards
This section describes the PCI Express card removal procedure with the PCI Hot Plug function.
The procedure includes common steps for all PCI Express cards and the additional steps required for a
specific card function or driver.
Thus, the descriptions cover both the common operations required for all cards (e.g., power supply
operations) and the specific procedures required for certain types of card. For details on removal of the cards
not described in this section, see the respective product manuals.
5.3.1 Common removal procedures for all PCI Express cards
1. Performing the required operating system and software operations depending on the PCI Express card
type
2. Powering off a PCI slot
3. Removing a PCI Express card
4. Performing the required operating system and software operations depending on the PCI Express card
type
Note
This section describes instructions for the operating system and subsystems (e.g., commands, configuration
file editing). Be sure to refer to the respective product manuals to confirm the command syntax and impact on
the system before performing tasks with those instructions.
The following sections describe card removal with the required instructions (e.g., commands, configuration
file editing) for the operating system and subsystems, together with the actual hardware operations. Step 3 is
performed by the field engineer in charge of your system.
5.3.2 PCI Express card removal procedure in detail
This section describes operations that must be performed in the PCI Express card removal procedure.
Preparing the software using a PCI Express card
See 'Preparing the software using a PCI Express card' in
detail".
Confirming the installation of the PCI Hot Plug driver
See 'Confirming the installation of the PCI Hot Plug driver' in
in
detail".
Confirming the slot number of a PCI Express slot
See 'Confirming the slot number of a PCI Express slot' in
detail".
"5.1.2 PCI Express card replacement procedure in
"5.1.2 PCI Express card replacement procedure
"5.1.2 PCI Express card replacement procedure in
148
C122-E175-02EN