Fujitsu PRIMEQUEST 2000 Series Administration Manual page 32

CHAPTER 1 Network Environment Setup and Tool Installation
1.3 Management LAN
Display/Setting item
Network Protocols: Network protocol settings
HTTP, HTTPS, telnet, SSH,
SNMP
SNMP Configuration: SNMP-related settings
SNMP Community
SNMP Trap
SNMP v3 Configuration: Settings specific to SNMP v3
Engine ID
SSL: SSL settings
Create CSR
Export Key/CSR
Import Certificate
Create Selfsigned Certificate
SSH: SSH settings
Create SSH Server Key
The possible settings for the respective ports depend on the MMB hardware
configuration.
Specifies whether to enable or disable a protocol, the port number, and the
Timeout time.
Specifies SNMP System Information and Community/User values.
- System Information: Specifies System Location and System Contact
values for SNMP. It also displays the system name specified from
[System] - [System Information].
-
Community: Can specify up to 16 Community/User items. Each
Community/User item includes the access-permitted IP address, SNMP
version, access permission, and authentication settings. For settings
specific to SNMP v3, use the SNMP v3 Configuration menu.
Specifies SNMP trap destinations.
You can set up to 16 destinations. Each trap destination item includes the
Community/User name, destination IP address, SNMP version, and
authentication level settings.
-
[Test Trap] button: Sends a test trap to the specified trap destination.
Specifies the Engine ID.
-
Enter the encryption hash function, authentication passphrase, and
encryption passphrase for users.
Creates a private key and a request for a signature (CSR: Certificate Signing
Request)
- SSL certificate status: Displays the current status of SSL certificate
installation.
- Key length: Length of the private key, 1024 bits or 2048 bits
- Entered information on the owner specified for the CSR
- Country, prefecture, city/town, organization, department, server, e-mail
address
-
[Create CSR] button: Displays a confirmation dialog box. Clicking [OK]
creates a new private key and a request for a signature. After
completion, a dialog box appears. Clicking [OK] registers the private key
and causes a jump to the [Export Key/CSR] window. Clicking [Cancel]
gives an instruction to discard the created private key and CSR.
Exports an MMB private key/CSR (backup).
- [Export Key] button: Exports a private key.
- [Export CSR] button: Exports a CSR.
Note
Clicking the [Export Key] button/ [Export CSR] button using FireFox 4 or later
flashes a save confirmation dialog box, resulting in the secret key not being
downloadable. Therefore, use Internet Explorer during [Export Key/Export
CSR] window manipulation.
Imports a signed electronic certificate sent from a certificate authority. To
import a file, specify the file, and click the [Import] button.
Creates a self-signed certificate.
- SSL certificate status: Displays the current status of self-signed
certificate installation.
- Term: Specifies the term of validity (number of days) of the self-signed
certificate.
- The other settings are the same as on the [Create CSR] window.
-
[Create Selfsigned Certificate] button: Creates a self-signed certificate.
Creates an SSH server private key.
- SSH Server Key Status: Displays the status of SSH server key installation.
- [Create SSH Server Key] button: Creates a private key. After creation is
completed, a confirmation dialog box appears. Clicking [OK] installs the
created key. Clicking [Cancel] discards it.
8
Description
C122-E175-02EN