Chapter 1 Network Environment Setup And Tool Installation; External Network Configuration; Table 1.1 External Network Names And Functions - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 1 Network Environment Setup and Tool Installation

1.1 External Network Configuration

CHAPTER 1
This chapter describes the external network environment and management tool installation for the
PRIMEQUEST 2000 series. For an overview of the management tools used for the PRIMEQUEST 2000
series, see Chapter 8 Operations Management Tools in the PRIMEQUEST 2000 Series General Description
(C122-B022EN).
1.1 External Network Configuration
The following diagram shows the external network configuration for the PRIMEQUEST 2000 series.
The following table lists the external networks. The letters A, B, and C correspond to those in
External network
Letter
A Management LAN
B Maintenance LAN
Network Environment Setup and
Tool Installation
FIGURE 1.1 External network configuration
No.
(1) SW redundancy
(2) Redundancy by teaming (GLS or equivalent)
(3) Disabled on the standby side
configuration.

TABLE 1.1 External network names and functions

External network name
Description
Function
- MMB Web-UI/CLI operations
- Operations management server
- Video redirection
- PRIMECLUSTER linkage
- Systemwalker linkage
- ServerView linkage
- REMCS connection
- FST (CE terminal) connection
1
FIGURE 1.1
C122-E175-02EN