Serverview Suite; Table 10.2 Functions Provided By The Mmb Cli - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 10 Configuration and Status Checking (Contents, Methods, and Procedures)
10.3 UEFI
Sets information.
Displays information.
Updates firmware.
Displays the version and update status of firmware.
10.3 UEFI
The following lists the functions provided by the UEFI. For details on the UEFI provided commands, see
Chapter 4 UEFI Command Operations in the PRIMEQUEST 2000 Series Tool Reference (C122-E177EN).
Displays menus for migration to boot processing,
Boot Manager, Device Manager, and Boot
Maintenance Manager.
Sends processing into automatic operating system
startup and performs boot processing in the
currently set boot sequence.
Sets the boot devices.
Makes settings such as whether to assign an I/O
space to each I/O device, CPU settings, and
whether to enable PXE boot.
Makes settings such as addition and deletion of
boot options and boot priority changes.
Setting of sadump environment

10.4 ServerView Suite

You can use ServerView Suite to visually confirm the PRIMEQUEST 2000 series configuration and the status
of each part.
For details on how to operate ServerView, see the ServerView Suite ServerView Operations Manager Server
Management.

TABLE 10.2 Functions provided by the MMB CLI

Function
TABLE 10.3 Functions provided by the UEFI
Function
Reference sections in the PRIMEQUEST
Tool Reference (C122-E177EN)
2.2 Setting Commands
2.3 Display Commands
2.4.1 update ALL
2.4.2 show update_status
Reference sections in the PRIMEQUEST 2000
Tool Reference (C122-E110EN)
3.1 Boot Manager Front Page
3.2 [Continue] Menu
3.3 [Boot Manager] Menu
3.4 [Device Manager] Menu
3.5 [Boot Maintenance Manager] Menu
6 Setting of sadump environment
210
2000 Series
Series
C122-E175-02EN