Fujitsu PRIMEQUEST 2000 Series Administration Manual page 199

CHAPTER 7 PCI Express card Hot Maintenance in Windows
7.3 NIC Hot Plugging
5. The following message appears. Click the [Yes] button.
6. Disable target NIC in Device manager.
Disable NIC with step 2-b at
PCI Express
7. Stop target NIC by using safely remove devices from computer.
Stop NIC with step 3 at
Express cards'.
8. Replace NIC by using MMB Maintenance Wizard.
Replace NIC with step 4 at
PCI Express
9. Confirm the replaced card by using Device Manager.
After replacement, open Device Manager, and confirm that the target device is recognized correctly.
10. After completing the replacement, open the Device Manager and open the properties dialog box of the
NIC to be incorporated into teaming.
'7.2.1 Replacement
cards'.
'7.2.1 Replacement
'7.2.1 Replacement
cards'. This step is performed by the field engineer in charge of your system.
procedure' in '7.2 Common Hot Plugging Procedure for
procedure' in '7.2 Common Hot Plugging Procedure for PCI
procedure' in '7.2 Common Hot Plugging Procedure for
175
C122-E175-02EN