Controlling Partition Startup By Using The Mmb; Figure 9.2 [Power Control] Window - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 9 Chapter System Startup/Shutdown and Power Control
9.2 Partition Power on and Power off
"#" column has the partition number.
For the details of [Power Control] window, see '1.3.1 [Power Control] window' in "PRIMEQUEST 2000
series Tool Reference" (C122-E177).
3. Click the [Apply] button after the [Power Control] of the partition to be powered on is set to [Power-On].
-> A confirmation dialog box appears.
4. Click the [OK] button to execute, and click the [Cancel] button to cancel.
Remarks
A warning message appears if the partition is already powered on, or if the specified control fails because the
power is turned off.
For the details on the display and setting items, see '1.3.1 [Power Control] window' in "PRIMEQUEST 2000
series Tool Reference" (C122-E177).

9.2.7 Controlling Partition Startup by using the MMB

Only users with Administrators or Operator privileges can set partition boot control. This section describes the
partition startup control procedure using the MMB.
1. Click [Partition] - [Power Control].
-> The [Power Control] window appears.

FIGURE 9.2 [Power Control] window

198
C122-E175-02EN