Fujitsu PRIMEQUEST 2000 Series Administration Manual page 206

CHAPTER 7 PCI Express card Hot Maintenance in Windows
7.4 FC Card Hot Plugging
f Confirm firmware version of target device.
QConverge Console GUI, and select device name of target FC card in left pane, and see [Port Info].
The firmware version is the information described as "BIOS Version:" in [Port Attribute Name].
g Close QConverge Console CLI/GUI.
3. Open ETERNUS Multipath Manager and place all the devices to be replaced offline.
Make all devices which match port numbers checked at step 2-b offline and close ETERNUS multipath
manager.
182
C122-E175-02EN