Figure 3.16 Status When There Error Has Occurred In The Memory (Memory Capacity Maintenance Mode); Figure 3.17 Status When An Error Has Occurred In The Memory (Memory Capacity Maintenance Mode); Table 3.9 Combination Of The Memory Mirror Status And The Failed Dimm (Non Mirror) - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 3 Component Configuration and Replacement (Add, Remove)
3.2 High availability configuration
Status when there error has occurred in the
FIGURE 3.16
Status when an error has occurred in the
FIGURE 3.17
The patterns supported in the combination of memory mirror status and failed DIMM are listed in the table
below.
TABLE 3.9 Combination of the
Mirror RAS Mode
Mirror Keep Mode
memory mirror status and the failed
Mirror mode before Places where the
reboot (during DIMM has failed
operation)
Full Mirror Mirror part
Partial Mirror Mirror part
Non Mirror part
memory (memory capacity maintenance mode)
memory (memory capacity maintenance mode)
Mirror
mode after reboot
Full Mirror (*1)
Partial Mirror (*1)
Partial Mirror (*1)
47
(
DIMM Non Mirror)
Memory capacity
after reboot
Reduction (*1)
Reduction (*1)
Reduction (*1)
C122-E175-02EN