Figure 11.19 Advanced Options Dialog Box - Fujitsu PRIMEQUEST 2000 Series Administration Manual

CHAPTER 11 Error Notification and Maintenance (Contents, Methods, and Procedures)
11.4 Collecting Maintenance Data
12. Click the [OK] button to close the [System Properties] dialog box.
13. Restart the partition.
After the partition restart, the settings take effect.
<For Windows Server 2008 R2>
Configure the paging file in the following procedure.
1. Log in to the server with Administrator privileges.
2. Select [Control Panel] - [System].
The [System Properties] dialog box appears.
3. Click the [Advanced] tab. Then, click [Performance] - [Settings].
The [Performance Options] dialog box appears.
4. Click the [Advanced] tab.
5. Click [Change] in [Virtual Memory].
The [Virtual Memory] dialog box appears.

FIGURE 11.19 Advanced options dialog box

235
C122-E175-02EN