Appendix F Status Checks With Leds; Led Type; F.1. Led Type; F1.1 Power Led, Alarm Led, And Location Led - Fujitsu PRIMEQUEST 2000 Series Administration Manual

Appendix F Status Checks with LEDs

F.1.
Appendix F Status Checks with LEDs
This appendix describes the types of mounted LEDs for the PRIMEQUEST 2000 series. It also describes how
to check the status with LEDs.

F.1. LED Type

The PRIMEQUEST 2000 series has
Customer Self Service (CSS) LED, System Alarm LED, and Location LED on front side of the cabinet. CSS
LED and System Alarm LED indicate faulty status of entire system. Location LED indicates physical location
of the system.
The PRIMEQUEST 2000 series also has Power LED, Alarm LED, and Location LED in components.
Power LED indicates power status in the component. Alarm LED indicates whether there is an error in the
component. Location LED indicates the mounting location of the component. Location LED can be set to on
and off. When you replace the component by using Maintenance Wizard, Location LED helps your work.

F1.1 Power LED, Alarm LED, and Location LED

In principle, each component for the PRIMEQUEST 2000 series comes equipped with the following LEDs.

LED type

Power
Alarm
Location

F.1.2 PSU

The PSU comes equipped with the following LED.
LED type
FANM#0 Alarm
Power/Alarm
FANM#1 Alarm
Status
PSU AC input is off.
AC input is on, and the PSU is off.
AC input is on, and the PSU is on.
PSU temperature error is predicted.
PSU temperature error is detected or
the power system error in a PSU is
predicted.
The power system of a PSU failed.
FANM#0 error occurs
FANM#1 error occurs
LED Type

TABLE F.1 Power LED, Alarm LED, and Location LED

Color
Green Indicates the power status of the component.
Orange Indicates whether there is an error in the component.
Blue - Identifies the component (location).
- Can be arbitrarily set to blink or turned off by the user.
- Indicates the component undergoing maintenance when
Maintenance Wizard is running.

TABLE F.2 PSU LED

Color
Orange Indicates state of FANM#0.
Yellow/Green Indicates whether there is AC input to each PSU, whether there is an
error in the PSU, and the PSU on/off status.
Orange Indicates state of FANM#1

TABLE F.3 Power status and PSU LED display

FANM#0 Alarm
Off
Off
Off
Off
Off
Off
Off or On (Orange)
(*1)
Off
Function
Function
Power/Alarm
Off Off
Blinking in green Off
On (green) Off
On (green) Off
Blinking in green Off
On (yellow) Off
Off Off
Off Off or On (Orange)
(*1)
257
FANM#1 Alarm OPL CSS (*2)
Off
Off
Off
On (yellow)
On (yellow)
On (yellow)
On (yellow)
On (yellow)
C122-E175-02EN