Procedure For Setting Uefi Driver Version 4.00A1 Or Earlier On The Fc Card; Displaying The Driver List - Fujitsu PRIMEQUEST 1000 Series Environment Configuration Manual

2.2 Procedure for Setting UEFI Driver Version 4.00a1 or
Earlier on the FC Card
This section describes the procedure for setting UEFI driver version 4.00a1 or earlier.

2.2.1 Displaying the driver list

Select [Force boot into EFI Boot Manager] from [Boot Selector] in the [Power Control] window
1.
of the MMB. Then, turn on the power. Start the UEFI Shell.
From the UEFI Shell, enter the following command to display the driver list.
2.
> drivers
FIGURE 2.6
Remarks
If the list of drivers is not displayed on a single page on the screen, enter "drivers -b".
The list is displayed in units of pages on the screen.
Example of driver list output (3)
19