Output Current - Toshiba TOSVERT VF-AS1 Instruction Manual

5.15 Changing the display unit % to A (ampere)/V (volt)
: Current/voltage display mode
• Function
These parameters are used to change the unit of monitor display.
% ⇔A (ampere)/V (volt)
Current 100% = Inverter's rated current
200V-class voltage 100% = 200Vac
400V-class voltage 100% = 400Vac
Example of setting
During the operation of the VFAS1-2037PL (rated current 16.6A) at the rated load (100% load), units are displayed
as follows:
1) Display in percentage terms
[Parameter setting]
Title
Current/voltage unit selection
* The converts the following parameter settings:
• A display Current monitor display
Setting of electronic thermal protection level 1/2/3/4
DC braking current
Stall prevention level
• V display Voltage monitor display
V/f 5-point setting
Note: Base frequency voltage 1~4 (

Output current:

100%
DC voltage:
100%
Function
:[%]
:[%] → A (ampere)/V (volt)
, ,
E-25
2) Display in amperes/volts
Adjustment range
, ,
, ,
, ) is always displayed in the unit of V.
E6581301
Output current:
16.6A
DC voltage:
200V
(Converted into
AC voltage)
Default setting
, , ,
, ,
5