Functions Of Output Terminals (Incase Of Sink Logic) - Toshiba TOSVERT VF-AS1 Instruction Manual

Sink logic/source logic
Switching between sink logic and source logic (input/output terminal logic) is possible.
⇒ For details, refer to the Section 2.3.2.

7.2.2 Functions of output terminals (incase of sink logic)

Use the above parameters to send various signals from the inverter to external equipment.
By setting parameters for the OUT1, OUT2 and FL (FLA, FLB and FLC) terminals on the terminal board, you can use
0~255 functions and functions obtained by combining them.
[Control terminal board]
How to use
Function of OUT1 • E • E • E • E
Function of OUT2 • E • E • E • E
Functions of FLA, FLB, and FLC • E • E • E To be set by parameter
Setting of output terminal function
Terminal
symbol
OUT1
OUT2
FL
OUT3~OUT6
R1~R2
R3, R4
Note: ~
Note: ~
Note: ,
To be set by parameter
To be set by parameter
Title Function
Output terminal function
selection 1
Output terminal function
selection 2
Output terminal selection 3
Output terminal function
~
selection 4~9
Output terminal function
,
selection 10~11
is for use of expansion terminal board 1 option unit.
is for use of expansion terminal board 2 option unit.
is for use of 16 bit binary board option unit.
G-5
FLA
FLB
FLC
P24
Ry OUT1
OUT2
Ry
NO
CC
Adjustment range Default setting
~
(Low-speed signal)
~ (Acceleration/decele
ration completion)
~
(Failure FL)
~
~
E6581301
7