Toshiba TOSVERT VF-AS1 Instruction Manual page 262

[24] Protection functions [3/3]
Communi
Title cation Function
No.
0637 PTC1 thermal selection
0638 PTC2 thermal selection
Braking resistance overload time
0639
(10 times of rated torque)
Step-out detection current level
0640
(for PM motors)
Step-out detection time (for PM
0641
motors)
*1: ⇒ For details, refer to Instruction Manual (E6581339) specified in Section 6.41.
[25] Override
Communi
Title cation Function
No.
0660 Override addition input selection
Override multiplication input
0661
selection
Logic output/pulse output
0669
selection (OUT1)
0670 AM terminal meter selection
This parameter moves to a fundamental parameter.
*1: ⇒ For the adjustment range, see the table on page K-39.
Adjustment range
0:Deselect
1:Select
0:Deselect
1:Select
0.1~600.0 sec.
10~150
0.0:Not detect
0.1~25.0
Adjustment range
0:Disabled
1:VI/II (voltage/current input)
2:RR/S4 (potentiometer/voltage input)
3:RX (voltage input)
4:Operation panel input enabled (including
LED/LCD option input)
5:2-wire RS485 input enabled
6:4-wire RS485 input enabled
7:Communications option input enabled
8:Optional AI1 (differential current input)
9:Optional AI2 (voltage/current input)
10:UP/DOWN frequency
11:Optional RP pulse input
12:Optional high-speed pulse input
13:Optional binary/BCD input
0:Disabled, 1:VI/II, 2:RR/S4, 3:RX, 4:
5:Optional AI1
0:Logic output
1:Pulse output
0~64 *1
Sensorless vector/vector with sensor (●:Effective, -:Ineffective)
Minimum Vector control
setting unit Default Write during
Speed
(Panel/Communi setting running
control
cation)
1/1 0 Disabled ●/●
1/1 0 Disabled ●/●
0.1/0.1 5.0 Disabled ●/●
1/1 100 Disabled -
0.1/0.1 0.0 Disabled -
Sensorless vector/vector with sensor (●:Effective, -:Ineffective)
Minimum Vector control
setting unit Default Write during
Speed
(Panel/Communi setting running
control
cation)
1/1 0 Enabled ●/●
,
1/1 0 Enabled ●/●
1/1 0 Disabled ●/●
1/1 2 Enabled ●/●
PM
Torque V/f Constant Reference
control
control
●/● ● ● *1
●/● ● ● *1
●/● ● ● 5. 19
- - - 6. 29
- - - 6. 29
PM
V/f Constant Reference
Torque
control
control
- ● ● 6. 34
- ● ● 6. 34
●/● ● ● 6. 35. 1
●/● ● ● 5. 16