Basic Parameters; History Function - Toshiba TOSVERT VF-AS1 Instruction Manual

5. Basic parameters

This parameter is a basic parameter for the operation of the inverter.
⇒ Refer to Section 11, Table of parameters.
5.1

History function

: History function
• Function
Automatically searches for 5 latest parameters that are programmed with values different from
the standard default setting and displays them in the
changed within this group
This function comes in very handy when you adjust the inverter repeatedly using the same
parameter.
Note 1: If no history information is stored, this parameter is skipped and the next parameter
Note 2: and
[Setting methods]
Key operated
MODE
ENT
ENT
ENT
(
(
MODE
MODE
MODE
.
are added respectively to the first and last parameters in a history of changes.
LED display
Displays the operation frequency (operation stopped).
(When standard monitor display selection
[Output frequency])
The first basic parameter "History function (
displayed.
The parameter that was set or changed last is displayed.
Press the ENTER key to display the set value.
Press the
Press the ENTER key to save the changed value. The
⇔
parameter name and the programmed value will flash on
and off alternately.
Use the same steps as those given above to display
) **** parameters that you want to search for or change setting
with the
)
( )
Parameter display
Press the MODE key to return to the parameter setting
↓
mode
After that you can press the MODE key to return to the
↓
status monitor mode or the standard monitor mode (display
↓
of operation frequency).
. Parameter setting can also be
Operation
key and key to change set value.
key and key.
: First historic record
: Last historic record
.
E-1
E6581301
.
5
=
)" is