Toshiba TOSVERT VF-AS1 Instruction Manual page 286

2) Standard specifications (large capacity types) Note 4
Item
Voltage class
Applicable motor (kW)
Type
Form
Output capacity
(kVA) Note 1:
Output current
(A)
Output voltage
Overload
current rating
Dynamic braking
circuit
Dynamic braking
resistor
Voltage-frequency
Allowable
fluctuation
Protective method
Cooling method
Color
EMC filter
DC reactor
Item
Voltage class
Applicable motor (kW)
Type
Form
Output capacity
(kVA) Note 1:
Output current
(A)
Output voltage
Overload
current rating
Dynamic
braking circuit
Dynamic braking
resistor
Voltage-frequency
Allowable
fluctuation
Protective method
Cooling method
Color
EMC filter
DC reactor
Note 1: Capacity is calculated at 220V for the 200V models and at 440V for the 400V models.
Note 2: Inverters, 18.5kW or greater, do not have wiring port covers. They have large openings, but there is no space
12
to bend the external cables inside the unit. If they are fitted external to the cabinet, please use an optional
wiring port cover.
Note 3: ±10% when the inverter is used continuously (load of 100%).
Note 4: For 200V-55kW, 400V-90kW or larger model, be sure to install DC reactor (optional).
However, this is unnecessary for DC input specifications.
Note 5: An external power supply backup available (optional) (Type: CSP002Z)
Note 6: Three-phase 380~480V-50/60Hz for 4900PC
• @
55
2550P
84
221
Three-phase 200V~230V (The maximum output voltage is equal to the input supply voltage.)
• @ • @ • @ • @ • @ • @ • @ • @ • @
Voltage + 10• "
90 110 132
4900PC 4110KPC 4132KPC 4160KPC
136 164 197
179 215 259
Three-phase 380V~480V (The maximum output voltage is equal to the input supply voltage.)
Built-in dynamic braking drive circuit
Note 6
Voltage + 10• "
Specification
200V class
VFAS1-
150%-1 minute, 165%-2 sec.
Built-in dynamic braking drive circuit
An external braking resistor (optional)
⇒
Rating: Refer to 5.19.
Three-phase 200~240V-50/60Hz Note 5
- 15% Note 3: Frequency ±5• "
IP00 Open type (JEM1030) Note 2
Forced air-cooled
RAL7016
External filter (optional)
Attached DC reactor
Specification
400V class
160 200 220
VFAS1-
4200KPC 4220KPC 4280KPC
239 295 325
314 387 427
150%-1 minute, 165%-2 sec.
External dynamic braking circuit (optional)
An external braking resistor (optional)
⇒
Rating: Refer to 5.19.
Three-phase 380~440V-50Hz
Three-phase 380~480V-60Hz
- 15% Note 3: Frequency ±5• "
IP00 Open type (JEM1030) 15% Note 2
Forced air-cooled
RAL7016
Built-in
Attached DC reactor
L-2
E6581301
75
2750P
109
285
280 355 400
4355KPC 4400KPC 4500KPC
419 511 578
550 671 759
Note 5
500
717
941