Changing The Battery - Silvercrest CRB-532 Instructions Manual

17.2 Changing the battery

To change the battery, press the lock on the left side of the battery case slightly to the
right. Now the battery compartment can be pulled out towards the front.
Now replace the old battery with a new one of the same type (CR 2025). Please pay
attention to the polarity ("+ pole" to the top) when you insert the battery. Please only touch
the battery on the edge, since there might be contact problems otherwise.
Now slide the battery compartment with the new battery back into the case. Make sure that
the battery compartment snaps back into the case.
Note:
Please remove the safety disc on the battery compartment before first using the remote control. Otherwise the remote control
will not operate properly.
Disposal of the battery
Please consider that you as an end consumer are obliged to return discarded batteries to a distributor or a redemption site
intended for this purpose by a public waste management facility.
123