Recording And Copying Function - Silvercrest CRB-532 Instructions Manual

16.3 Recording and copying function

With the Silvercrest CRB-532 you have the option of recording music tracks, radio features, news etc onto removable SD/MMC
or USB removable storage devices. The compression types WMA and MP3 are available for this. How you can change the
compression mode is described above in section "REC" under 16.2. Any kind of music track, radio feature and similar pieces
from the radio, a CD or the AUX IN input can be recorded. Before recording, just select the appropriate playback source by
using the "MODE" button .
To start a recording, connect a USB removable storage device or insert an SD/MMC card into the card slot.
Important:
Please inform yourself of the legal situation that applies in your country to the recording of works that are protected by
copyright. In case of doubt, consult expert opinion.
Note:
The files stored by the device on the data storage medium are named as follows
TRACK**.MP3 or TRACK** .WMA for recordings from an audio CD.
Tuner**.MP3 or Tuner** .WMA for recordings from the radio
LINE**.MP3 or LINE** .WMA for recordings from AUX IN
MUSIC**.MP3 or MUSIC** .WMA for copies of an MP3/WMA CD
Recording from a CD
If you want to record from a music CD, select this by means of the "MODE" button
about three seconds. The recording menu appears and you have the choice between "MMC ALL TRACK RECORD" (saving all
tracks of the CD on an SD/MMC card); "USB ALL TRACK RECORD" (saving all tracks of the CD on a USB removable storage
device), "MMC ONE TRACK RECORD" (saving the current track of the CD on an SD/MMC card) or "USB ONE TRACK
RECORD" (saving the current track of the CD on a USB removable storage device). If only an SD/MMC card is inserted, only
the option to save onto the SD/MMC card is offered. If only a USB removable storage device is inserted, only the option to save
onto the USB removable storage device is offered. If no storage medium is connected or inserted, the message "NO MEDIA"
appears and the recording process is stopped.
To select which storage medium should be used for the recording, press the control dial
indicated and confirm the selection with the "BAND" button
will begin flashing on the display. To stop a current recording, press the "DIS/REC" button
recording will stop.
** = continuing number of titles (01, 02, 03, ...)
and then press the "DIS/REC" button
. Then the recording will start automatically. The message "REC"
until the desired storage source is
for more than three seconds. The
for
113