Silvercrest CRB-532 Instructions Manual page 46

Bluetooth car radio
Hide thumbs

Advertisement

Table of Contents
To activate the "LOUD" function, press the control dial
the control dial
repeatedly until you get to the menu item "LOUDNESS". Here you will have the option of activating ("LOUD
ON") or deactivating ("LOUD OFF") the function by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial
not change anything on the device for approximately five seconds). If you confirm the selection by pressing the control dial
you advance to the next possible setting. If you use automatic storage, the device will return to the standard display.
Note:
When the "LOUDNESS" function ("LOUD ON") is activated, the message "LOUD" appears on the display. This is turned off
after deactivation.
"LOC": Distance setting for station search
The "LOCAL" function is relevant for station search. Here you may select whether only local, strong stations ("ON") or also
weaker, more distant stations ("OFF") are searched for. To access this menu item, press the control dial until menu level 2 is
reached. The "INVOL" function will appear. Now briefly press the control dial until you reach the menu item "LOCAL". You can
choose between "ON" or "OFF" by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial
not change anything on the device for approximately five seconds). If you confirm the selection by pressing the control dial
you advance to the next possible setting. If you use automatic storage, the device will return to the standard display.
Note:
This setting only affects the radio mode and can only be carried out while the radio mode is active.
"STEREO": Switching between stereo and mono playback
This menu item gives you the option of selecting between stereo and mono playback.
To access the menu, press the control dial
the control dial
repeatedly until you reach the menu item "STEREO". Here you will have the option of selecting between
"MONO" and "STEREO" by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial
not change anything on the device for approximately five seconds). If you confirm the selection by pressing the control dial
you advance to the next possible setting. If you use automatic storage, the device will return to the standard display.
Note:
This setting only affects the radio mode and can only be carried out while the radio mode is active.
112
until menu level 2 is reached. The "INVOL" function will appear. Press
until menu level 2 is reached. The "INVOL" function will appear. Now briefly press
or through automatic storage (do
or through automatic storage (do
or through automatic storage (do
,
,
,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents