Menu Level 2 - Silvercrest CRB-532 Instructions Manual

16.2 Menu level 2

Menu level 2 is reached if the control dial is pressed for approximately two seconds. The individual menu items can be selected
by repeatedly pressing the control dial.
On menu level 2, the functions "INVOL" (initial volume), "ADJ" (setting the time), "TAVOL" (standard volume for traffic
announcements), "EON" (automatic station change for traffic announcements), "REC" (recording function settings), "TELVOL"
(standard volume for phone conversations), "DSP" (tone settings), "LOUD" (tone setting), "LOC" (distance setting for station
search), and "STEREO" (switching between stereo and mono playback) can be set.
"INVOL": Initial volume
The "INVOL" function enables an adjustment of the playback volume when the device is turned on according to individual
preferences.
To change the initial volume of the device, press the control dial
appears. There you have the option of setting the initial volume of the device by turning the dial. Turning to the right increases
the initial volume, turning to the left reduces the initial volume. The initial volume can be set between 0-45. Here 0 = no sound
and 45 = maximum volume of the device.
The setting is saved either when the desired value is confirmed by pressing the control dial
not change anything on the device for approximately five seconds). If you confirm the selection by pressing the control dial
you then advance to the next possible setting. If you use automatic storage, the device will return to the standard display.
Note:
During playback, it is possible to adjust the volume to current requirements at any time by means of the control dial
"ADJ": Setting the time
To set or change the time settings, press the control dial
Press the control dial until you reach the menu item "ADJ". Here you have the option of setting the time of the device by
turning the dial. Turning to the right changes the number of the hours; turning to the left changes the minutes.
The setting is saved either when the desired value is confirmed by pressing the control dial
not change anything on the device for approximately five seconds). If you confirm the selection by pressing the control dial
you will reach the next possible setting.
If you use automatic storage, the device will return to the standard display.
Note:
If the device receives an RDS station with an RDS time signal, the clock will be automatically updated in particular intervals.
until the menu level 2 is reached. The "INVOL" function
until you reach menu level 2. The "INVOL" function will appear.
or through automatic storage (do
.
or through automatic storage (do
,
,
109