Table of Contents
Advertisement
SET NTP SECONDARY
Syntax
SET NTP SECONDARY <host>
Description
Sets the secondary server used for synchronizing time/date using the Network Time Protocol (NTP).
<host> can be either an IPv4 address, and IPv6 address or a DNS name.
Restrictions
IPv4 addresses must be in the form ###.###.###.###, where each ### ranges from 0 to
255.
IPv6 addresses must be formed without the network prefix length.
Inventory and status
These commands display various inventory and global state data.
SET DISPLAY EVENTS
Syntax
SET DISPLAY EVENTS { ON | OFF }
Description
Turns on or off the displaying of events that are triggered by status changes in the system.
Restrictions
This command is specific to the current CLI session and must be issued for each CLI session
to display events in that session. (The setting is not persistent.)
Upon boot of the EM, the event display is OFF.
SHOW ALL
Syntax
SHOW ALL
Description
Executes all SHOW commands in succession.
Restrictions
To save the output, you must configure your SSH software to log the session to a file or increase
the history buffer size so that the output can be copied and pasted into another file.
SHOW CONFIG
Syntax
SHOW CONFIG
Description
Displays the script required to recreate the settings of the enclosure. Passwords are not included
for any user.
138 Managing the EMU
Advertisement
Table of Contents
