Table of Contents
Advertisement
4.
Remove the top back panel by pressing the panel release button and lifting the latch to slide
the top back panel off.
5.
Open the release handle (1,
board (2,
Figure 48 (page
NOTE:
You may need to use significant force to accomplish this task.
Figure 48 Removing the server interposer board
Replacing the server interposer board
1.
With the release handle open, align the server interposer board with the alignment pins (1,
Figure 49 (page
69)), and then close the server interposer release mechanism (2,
(page
69)).
NOTE:
Remember to move the server backplane power cable out of the way of the alignment
pins.
Figure 49 Replacing the server interposer board
2.
Reinstall the top back panel.
3.
Replace the enclosure in the rack as described in
(page
68).
Figure 48 (page
69)), and pull up to remove the server interposer
69)).
"Inserting the system enclosure into the rack"
Removing and replacing the server interposer board
Figure 49
69
Advertisement
Table of Contents
