Table of Contents
Advertisement
Figure 28 Enclosure Manager unit LEDs
Table 6 Enclosure manager unit LEDs status
Item
Description
1
EM display
2
EM fault LED
3
EM health LED
LEDs are off when the enclosure is powered off.
Figure 29 HP 2-port 1 GB Ethernet I/O modules LEDs
Table 7 HP 2-port 1 GB Ethernet I/O modules LEDs status
Item
Description
1
Module health LED
2
Module fault LED
*LEDs are off when enclosure is powered off.
38
Monitoring and troubleshooting the storage system
Status
The LED blinks during power-up, but then the display changes only in
response to commands from the Enclosure Manager Display.
Amber flashing/green LED off = issue. Use the CLI commands SHOW
ENCLOSURE STATUS and SHOW SYSLOG EM to determine possible
fault causes.
The health LED is only green and is either on (Healthy) or off (Power
off or Faulted).
Status
Solid green when module health is good
OFF* when module has failed
Solid amber when module has failed
OFF* when module health is good
Advertisement
Table of Contents
