Replacing the fan module
1.
Insert the replacement fan module
Figure 60 Replacing the fan module
2.
Verify that the replacement component is working properly by checking the associated LED
status.
NOTE:
3.
Confirm that the system has resumed normal operations.
Removing and replacing the power UID button assembly
Removing the power UID button assembly
1.
Power off the system as described in
2.
Remove the enclosure from the rack as described in
rack" (page
3.
Remove the top back panel by pressing the panel release button and lifting the latch to slide
the top back panel off.
4.
Remove the hard drive fan module
Figure 61 Removing the fan module
76
Removing and replacing hardware components
It should take approximately 15 seconds for the LED status to appear.
67).
(Figure 60 (page
76)).
"Powering the storage system off and on" (page
"Removing the system enclosure from the
(Figure 61 (page
76)).
60).