Table of Contents
Advertisement
Figure 69 Installing the PCIe module
3.
Plug in all cables to the PCIe module in their original locations.
4.
Power on the server blade by pressing the power button ON.
5.
Verify that the replacement component is working properly by checking the associated LED
status.
6.
Confirm that the system has resumed normal operations.
Removing and replacing the EMU module
Removing the EMU module
1.
Verify the failed component as described in
2.
Unplug any cables from the EMU module.
3.
Press the EMU module release lever to the right (1,
the EMU module (2).
Figure 70 Removing the EMU
"Verifying component failure" (page
Figure 70 (page
Removing and replacing the EMU module
66).
81)), and then remove
81
Advertisement
Table of Contents
