Figure 90 Removing the plug bracket from the coil power plug
10. Unplug the coil power assembly from the midplane board
Figure 91 Unplugging the coil power assembly
1 1. Press the release mechanism on the side rail (1,
drive drawer fully out of the enclosure (2).
WARNING!
The hard drive drawer is heavy, even after removing the hard drives. Make
sure the drawer is fully supported as you remove it from the enclosure.
Figure 92 Removing the drive drawer
(Figure 91 (page
Figure 92 (page
93)), and then pull the hard
Removing and replacing a drive drawer
93)).
93