Table of Contents
Advertisement
SET USER PASSWORD
Syntax
SET USER PASSWORD "<user name>"["<new password>"]
Description
Sets a user's password. If you do not supply a password on the command line, you are prompted
to enter it.
Restrictions
Only the Administrator account can modify the password of the Administrator account.
The <user name> is case-sensitive.
The <new password> must be 3 to 40 characters long.
The character set includes all printable characters.
This command is not valid in script mode.
SHOW USER
Syntax
SHOW USER [ [LIST | "<user name>"] ]
Description
Displays general user information and user rights (which is always "Admin") for this firmware
version.
Restrictions
Does not show information for restricted user accounts—only shows information for
Administrator and other end-user-created accounts.
Since there are no bay or device access restrictions, no information about bays being assigned
is given.
SHOW SSHFINGERPRINT
Syntax
SHOW SSHFINGERPRINT
Description
Displays the key fingerprint of the host public key of the Enclosure Manager.
Restrictions
None
SHOW SSHKEY
Syntax
SHOW SSKEY
Description
Displays the contents of the existing ssh authorized key files (stored in NAND Flash).
134 Managing the EMU
Advertisement
Table of Contents
