Table of Contents
Advertisement
Restrictions
None
SET SESSION TIMEOUT
Syntax
SET SESSION TIMEOUT <timeout>
Description
Sets the number of minutes before insessions are removed. Valid session timeout. Please note: If
the session timeout value is lowered, currently insessions may be removed. The default timeout is
1,440 minutes.
Restrictions
<timeout> must be in the range from 10 to 1,440 minutes (24 hours). The session timeout can
be disabled by setting it to zero.
SLEEP
Syntax
SLEEP <seconds>
Description
Pauses the session for a fixed period of time. Useful for adding delays to scripts. The <seconds>
parameter can be any whole number from 1 to 86400.
NOTE:
Once the pause begins, there is no way to continue the session before time runs out, but
you can always terminate the session (from the client end) and start another one.
Restrictions
The <seconds> parameter can be any whole number from 1 to 86400.
HISTORY
Syntax
HISTORY
Description
Shows the history of commands for the current session.
Restrictions
None
Using the Enclosure Manager physical interface
The primary interface to the Enclosure Manager is the Ethernet LAN port, which is intended for
remote management of the enclosure. AC power is applied to the enclosure so that auxiliary power
is available to the EMU. The enclosure may or may not be powered on. Solution software may or
may not be installed.
Using the Enclosure Manager physical interface 157
Advertisement
Table of Contents
