Table of Contents
Advertisement
4.
Place the server blade on a flat, level work surface.
WARNING!
the internal system components to cool before touching them.
CAUTION:
before beginning any installation procedure. Improper grounding can cause ESD damage.
Replacing the server blade
1.
Install the server blade (1,
the handle open (2).
Figure 122 Replacing the server blade
2.
Power on the server blade.
3.
Confirm that the system has resumed normal operations.
Removing and replacing the server blade hard drive
Removing the server blade hard drive
1.
Verify the failed component as described in
2.
Back up all data on the hard drive.
To reduce the risk of personal injury from hot surfaces, allow the drives and
To prevent damage to electrical components, properly ground the server blade
Figure 122 (page
109)), and then push the handle into place with
"Verifying component failure" (page
Removing and replacing the server blade hard drive 109
66).
Advertisement
Table of Contents
