Table of Contents
Advertisement
2 Installing the storage system
This chapter explains how to install the storage system hardware.
Verify the kit contents
Remove the contents, ensuring that you have all of the following components. If components are
missing, contact HP technical support.
Hardware
HP X5000 G2 Network Storage System
NOTE:
D2600 or D2700 disk enclosures may be connected to the storage system.
Rail kit
Power cords
Media and documentation
HP X5000 G2 Network Storage System Quick Start Guide
HP ProLiant Essentials Integrated Lights-Out Advanced Pack
End User License Agreement
HP X5000 G2 System Recovery DVD
Certificate of Authenticity Card
Safety and Disposal Documentation CD
Locate and record the product number, serial number, and SAID number
Before you begin installation, locate and record the product number of the storage system, serial
number, and support contract service agreement ID (SAID) number.
The product number of the storage system and serial number are located in three places:
Top of the storage system
Back of the storage system on a pull-out tab
On the storage system shipping box
The SAID number is listed on your service contract agreement (see
ID" (page
54)).
Unpack and rack the storage system hardware
WARNING!
storage system into the rack.
External disk enclosures are not included with the storage system, but up to four
The storage system enclosure is heavy. Always use at least two people to move the
"Obtaining the Service Agreement
Verify the kit contents
9
Advertisement
Table of Contents
