the new status is reported immediately in the Components Status Summary section on the SMH
main page.
When the Enclosure Manager IP address is set incorrectly, the enclosure status displayed is
Lost communication. Because the Enclosure Manager has lost communication with the external
network, none of the other items in the Enclosure Information section can be displayed.
The enclosure I/O ports are numbered from 1 to 8 in the SMH.
Figure 17 I/O module
These numbers correspond to the I/O modules in the enclosure bays.
Figure 18 I/O module bays
1. LOM module
2. LOM module
3. MEZZ module
4. Intraconnect (internal switch)
Network
This section shows the status of the network connections.
28
Monitoring and troubleshooting the storage system
5. PCIe module
6. PCIe module
7. SAS I/O module
8. SAS I/O module