Cutting The Media - MUTOH Falcon Outdoor 46 User Manual

Cutting the Media

NOTE
• When a new roll of media is mounted, the leading edge of the
media may not be straight. In this case, the leading edge of the
media should be cut.
The [CANCEL] key can be switched between the cancel function and the
media cut function, depending to the status of the printer. You should use it in
accordance with your need.
Printer Status
Before data reception
During data reception
During data processing DATA LED flashing
During printing
Use the cut function if you want to cut the leading edge of the roll media.
The cut function can be used if roll media is loaded and data is not being
received or processed.
Step 1
Make sure that roll media is loaded and data is not being received or
processed. (DATA LED is not lit.)
Step 2
Press the [CANCEL] key.
Step 3
Roll media is fed then cut.
Falcon Outdoor 46/62 USER GUIDE (AP-75046)
DATA LED off
DATA LED on
During head movement Printing is forcibly
Result of Pressing the
[CANCEL] key
Media is fed then cut
Input data is cancelled
Processed data is can-
celled
stopped and the data is
cancelled
79